Meet our newest product on the market! We offer a variety of different options and sizes for our tailgate sander. For more information about this product, call our office and talk to one of our salesmen!
- Hydraulically operated
- Fully welded 7 ga. 201 stainless steel construction – unpainted
- 1/4″ thick end plates (14 1/4” height)
- Durable 7 ga. cover permits dumping of any materials over the spreader for stock piling
- Full 270-degree opening cover plate for easy access – once safety interlock is removed
- Quick release safety interlocks
- Clean-out door opens to the top with locks to hold in raised position
- 9″ diameter auger with 3/8” thick flighting (auger flight spacing is approx. 6″)
- Flighting is welded to 2 1/2” schedule 40 pipe
- Replaceable poly bushing on idler end and motor end
- Left hand self-leveling adjustable spinner frame assy.
- A stationary shield in front of the spinner protects the undercarriage from thrown material
- 18″ polyurethane spinner disk 3/4” thick with 6-formed fins
- Spinner disk hub set up for single 3/8” bolt to the spinner motor
- Spinner motor with greaseable seal saver – 2 bolt mount (shaft with key-way & bolt hole) (2.8 CIR)
- Direct drive auger motor with seal saver – 4 bolt mount (45.6 CIR)
- 1 1/4” idler shaft runs through greaseable ball type bearing with a 4-bolt mounting flange
- Mounts to 96″ wide dump truck body – includes standard quick disconnect pins
- Easy attach and detach the spreader
- One year factory warranty
- 4″ auger flight spacing in lieu of std. 6″ (for more even flow)
- 6″ extended trough (for asphalt body) in lieu of std.
- Dual spinners (adding RH spinner kit), 201 stainless steel, 18″ poly disk
- Std. 10 ga. 201 S/S spill shields & bolt kit (shipped loose) (bolt to inside of tailgate) (31 1/2“)
- Weld on customer ID numbers on the sander (location details are required)
- Right hand berm chute, 201 stainless steel (shipped loose)
Social