Standard Features:
- Mid-Mounted or Rear Mounted Behind Scraper
- All Hydraulic
- 6’/7’/8′ Standard Lengths
- 27″ Moldboard Height
- 10 ga. Moldboard with 5 Ribs Fully Welded
- 3″ x 15″ Toe Cylinder with 1-1/2″ Nitrided Rod – 15″ Stroke
- 3″ x 10″ Decel Heel Cylinder with 1-1/4″ Nitrided Rod with Hydraulic
- Restrictor Valves to Adjust the Speed of the Wing Up and Down
- 1-1/4″ Main Pivot Bolt
- 7-1/2″ of Float at the Toe
- Floating Link Arm at the the Heel
- 3/8″ x 4″ x 4″ Lower Angle with Reinforcing Gussets
- Heavy Duty Adjustable Spring Loaded Push Beam with Shear Pin
- Safety Chain at the Toe
- Saftey Chain at the Rear Stop
- A.A.S.H.O. Standard Punching on all Blades
Options:
- Trip Cutting Edge
Literature:
Page 1 (Click to download .pdf form)